Yf-s201 Proteus Library · Updated

pulseCount = 0; lastTime = now; attachInterrupt(digitalPinToInterrupt(2), pulseCounter, FALLING);

Therefore, simulation requires generating a digital signal whose frequency varies based on an input stimulus (simulated water flow). Short answer: No. yf-s201 proteus library

flowRate = (pulseCount / PULSES_PER_LITER) * 60.0; // L/min totalLiters += flowRate / 60.0; // Add volume for 1 second Out of the box, Proteus (version 8 and

Serial.print("Flow Rate: "); Serial.print(flowRate); Serial.print(" L/min\t\tTotal: "); Serial.print(totalLiters); Serial.println(" L"); many developers hit a wall.

If you have searched for "YF-S201 Proteus Library" on Google, GitHub, or Labcenter’s official forums, you have likely come up empty-handed. Out of the box, Proteus (version 8 and 9) does not include a native simulation model for flow sensors.

void loop() unsigned long now = millis(); if (now - lastTime >= 1000) // Every second detachInterrupt(digitalPinToInterrupt(2));

Introduction The YF-S201 is arguably the most popular water flow sensor among hobbyists, students, and engineers working on Arduino, ESP32, or STM32 projects. It is inexpensive, reasonably accurate, and easy to interface. However, when moving from physical prototyping to simulation, many developers hit a wall.