Super Shore 1x3 | Link

The Super Shore 1x3 Link has a "natural" orientation. The manufacturer's stamp should face outward for visual inspection. The link should hang vertically; if it tilts before lifting, your sling lengths are mismatched. Safety Protocols and Inspection Checklist Given that a failure of the 1x3 link results in a complete loss of load control, daily inspection is non-negotiable.

Always purchase from a certified rigging supply house. A counterfeit Super Shore 1x3 Link made from mild steel can fail at 30% of its claimed capacity. Look for the legible stamp, request the material test report (MTR), and when in doubt, throw it out.

Disclaimer: This article is for informational purposes only. Always consult a Professional Engineer or Certified Rigging Inspector for your specific lift plan. Load capacities vary by manufacturer. super shore 1x3 link

A: Look on the flat side of the top eye. Standard markings include Manufacturer logo, "1X3," "WLL XX Tons," and "Grade 80/100." Conclusion: Is the Super Shore 1x3 Link Right for You? If your lifting operation requires the stability of a three-point suspension, the efficiency of a single attachment point, and the assurance of high-grade alloy steel, then the Super Shore 1x3 Link is an indispensable tool in your inventory.

In the high-stakes world of industrial lifting, cargo securement, and synthetic rigging, the smallest component can often be the most critical point of failure—or success. Among the myriad of connecting links, shackles, and hooks, one term that has been gaining significant traction among rigging professionals and marine cargo handlers is the Super Shore 1x3 Link . The Super Shore 1x3 Link has a "natural" orientation

It bridges the gap between a standard master link (which struggles with tri-leg geometry) and a custom spreader beam (which is expensive and heavy). For construction sites, heavy machinery transport, and marine rigging, this specific link offers the best balance of weight, strength, and versatility.

A: Absolutely not. Once a forging yields (stretches), it has lost its tensile strength. Do not attempt to heat and bend it back. Retire the link immediately. Safety Protocols and Inspection Checklist Given that a

Insert the top hook or shackle of your first two slings into the two outer lower rings of the 1x3 link. Ensure the slings are not twisted.