Nokia 105 Rm 908 Keypad Ways Online

Here is the factory :

Remember: 90% of keypad way failures are either at the connector pins or within 2cm of the CPU. Methodical testing will save you hours of guesswork. nokia 105 rm 908 keypad ways

Save a high-resolution photo of a working Nokia 105 RM-908 motherboard’s keypad area. Use it as a reference to visually trace all KBR and KBT lines before starting any repair. Need more help? Leave a comment below or visit our forum for Nokia RM-908 schematic downloads and video tutorials. Here is the factory : Remember: 90% of

| Pin No. | Signal Name | Goes To (Component) | Function | |---------|-------------|---------------------|-----------| | 1 | KBR0 (Column 0) | CPU (Row Sense) | Keys: 4, 5, 6, * | | 2 | KBR1 (Column 1) | CPU | Keys: 1, 2, 3, # | | 3 | KBR2 (Column 2) | CPU | Keys: Left, Up, Down, Right, Call | | 4 | KBR3 (Column 3) | CPU | Keys: End/Power, Cancel/Back | | 5 | KBT0 (Row 0) | CPU (Column Drive) | Keys: 1, 4, Left, End | | 6 | KBT1 (Row 1) | CPU | Keys: 2, 5, Up, Cancel | | 7 | KBT2 (Row 2) | CPU | Keys: 3, 6, Down | | 8 | KBT3 (Row 3) | CPU | Keys: *, #, Right, Power | | 9 | GND | Ground | Common ground | | 10 | GND | Ground | Common ground | | 11-16 | NC / LED+ | Not connected / Backlight | Keypad backlight anode | Use it as a reference to visually trace

Happy repairing!

(Note: Actual pin numbers may vary slightly depending on board revision; always test continuity with a multimeter before jumping.) Understanding the matrix helps you quickly diagnose which row or column has failed. Below is the standard mapping for the Nokia 105 RM-908 :