| Error Code | Meaning | Solution | | :--- | :--- | :--- | | | Printer not in maintenance mode | Repeat the button combination exactly. The SX125 is picky with timing. | | Function not supported | Wrong program version | You need the SX120 series program. SX130-only versions will fail. | | Timeout error | USB buffer issue | Disable "USB Selective Suspend" in Windows Power Options. | | Counter reset failed | EEPROM write protection | Power cycle and retry. If persists, the EEPROM chip may be physically failing. | | 20000100 | Printer is still in busy state | Unplug all USB devices except the printer. Reboot PC. | Part 7: Should You Use the Adjustment Program or Just Buy a New Printer? The Epson SX125 is an entry-level all-in-one. On the used market, it is worth $20–$30. A new waste ink reset service at a shop costs $50.
Yes, but only if you use the correct version. The SX 125 belongs to the SX120 series adjustment program package. Many users fail because they download a generic program intended for an R290 or an older ME series. epson adjustment program sx 125 work
This error is not a hardware malfunction in the traditional sense. It is a counter lock. Your printer has been counting every single time it cleans its print head, and it has decided that a sponge inside (the waste ink pad) is theoretically full. In many cases, the pad still has capacity left, but the printer refuses to work. | Error Code | Meaning | Solution |
After 5–10 seconds, a green checkmark will appear. The program has successfully worked on your SX125. Turn the printer off, wait 10 seconds, and turn it back on. The "Service Required" error should be gone. Part 5: The Critical Warning – Physical Waste Ink Overflow Here is where most online guides lie to you. The adjustment program resets the counter , but it does not empty the physical sponge. SX130-only versions will fail