Do not attach the kneeling pad permanently. You want it removable for cleaning. Cut your 12” x 24” plywood. Screw two small cleats (1” x 1” strips) to the side panels, 7” up from the floor. Set the plywood base on these cleats. This creates a 7” high kneeling surface.
Take your two side panels. Attach the Bottom Stretcher (24” wide) flush with the bottom edge using glue and screws. Attach the Back Support Slat at the top rear edge. You now have a standing “U” shape. diy prayer kneeler plans work
The short answer is a resounding —but only if you understand the hidden geometry of prayer kneelers. A poorly built kneeler is a distraction; a well-built one is an invitation to contemplation. Do not attach the kneeling pad permanently
First, You are custom-building an ergonomic tool. No mass-produced factory in Vietnam knows your knee pain or your height. You do. By cutting that 8-degree angle and sourcing 4” foam, you solve a physical problem that $60 Amazon kneelers cannot solve. Screw two small cleats (1” x 1” strips)